Oil- and fuel hose
TYPE: "TEG(K)-2A"
Textile-Inlay-Meshwork
This hose complies with DIN 73379 2A (1997) and DIN 73379 A1 (2014)
tolerances according to DIN EN ISO 1307:2008-4 type C
Construction:
Inner layer: NBR-caoutchouc
Reinforcement: textile meshwork
Outer layer: CR
Application:
Fuel hose for petrol and diesel fuels, heating oil, ethanol, kerosene, fluids on mineral-oil-based, glycol, etc.
Characteristics:
Resistant against ozone and abrasion
Temperature range: -35°C to +90°C
short-time up to +110°C (depending on use)
Delivery Programm and technical data.
nominal size DN | I.D. [cir. mm] | O.D. [cir. mm] | minimum bend radius [mm] | working pressure [bar] | short form | part-no. | weight g/m |
---|---|---|---|---|---|---|---|
3 | 4,5 | 11,5 | 50 | 10 | TEG(K)-2A-3 | 215 0 305 | 75 |
6 | 7,5 | 13,5 | 70 | 10 | TEG(K)-2A-6 | 215 0 300 | 141 |
8 | 9,0 | 15,0 | 80 | 10 | TEG(K)-2A-8 | 215 0 320 | 159 |
10s | 11,5 | 18,5 | 100 | 10 | TEG(K)-2A-10s | 215 0 331 | 212 |