Fuel hose for all fuels in cars
TYPE: "TEG(FKM)"
Textile inlay meshwork, RME resistant
Construction:
Inner layer: FKM
Interlayer: ECO
Reinforcement: Aramid meshwork
Outer layer: ECO
Application:
For all fuels in cars, also PME (RME)-containing diesel fuels, flexible fuels (for example E5, E10 or E85)
Characteristics:
Highly flexible, very low fuel permeability, high heat resistance.
Corresponds: EU scrap car guideline 200/53/EG
BMW GS 93010-3 VS11 11 and 11 13
DBL 6256.70
DIN 73379 Type B1
SAE J30 R9
GME 08 007
Temperature range: -40°C to +125°C
short time up to +150°C (depending on use)
Delivery Programm and technical data.
|
nominal size |
I.D. [cir. mm] |
O.D. [cir. mm] |
minimum bend radius [mm] |
working pressure [bar] |
short form | part-no. | weight [g/m] |
| 3 | 5,0 | 11,0 | 60 | 10 | TEG(FKM)-3 | 215 0 401 | 91 |
| 4 | 6,0 | 12,0 | 70 | 10 | TEG(FKM)-4 | 215 0 190 | 127 |
| 6 | 8,0 | 14,0 | 70 | 10 | TEG(FKM)-6 | 215 0 195 | 150 |
| 8 | 9,3 | 15,3 | 70 | 10 | TEG(FKM)-8 | 215 0 200 | 175 |
| 10 | 12,0 | 19,0 | 80 | 10 | TEG(FKM)10 | 215 0 205 | 260 |